Stuart Erime Noktasi Tayin Cihazi, Melting Point Apparatus, Analog, SMP11

Easy to operate - ideal for educational use
Supplied with safe spirit filled thermometer
Economical price

With new safety features and easy to use, the SMP11 is ideal for use in education.

Supplied with a safe, spirit filled mercury free thermometer, the low toxic blue spirit will not pose a health hazard in the event of a breakage. Easy to follow instructions are printed directly on to the apparatus and are available in most European languages.

With a manually adjustable heating rate, the SMP11 will rapidly heat samples up to 20°C per minute to the melt temperature and up to the maximum temperature of 250°C. Accurate readings to within 1°C of the melt temperature can be achieved by using a slower heating rate of between 1 and 10°C per minute.

Up to three samples can be viewed and tested at any one time. Samples are illuminated by a bright white LED and viewed via a magnifying lens. The magnifying lens can be detached for cleaning using the simple to follow instructions printed on to the instrument.

No. of samples                         Up to 3
Temperature range                  Ambient to 250°C
Heating rate                            1 to 10 °C/min
Dimensions (w x d x h)            370 x 140 x 110 mm
Net weight                              1.7kg
Electrical supply                      230V, 50Hz, 50W

Electrical supply 230V, 50Hz, 50W

Melting point tubes
Made from soda glass, these tubes are easy to seal in a Bunsen flame and break into two. Supplied in robust tube holder, pack of 100 tubes. Tube overall length is 100mm Tube diameter = 1.9mm, inner diameter = 1.3mm and wall thickness = 0.3mm

SMP11         Melting point Apparatus, complete with thermometer and pack of 100 melting point tubes (open both ends)
SMP11/1     Spare thermometer, spirit filled, 0°C to 250°C
SMP1/2       Cooling plug (brass) for rapidly reducing heating block temperature after use
SMP1/4       Glass melting point tubes, open at both ends, pack of 100
SMP2/1       Glass melting point tubes, closed at both ends, pack of 100
SMP10/1     Glass melting point tubes, closed at one end, pack of 100

Stuart Erime Noktası Tayin Cihazı, Melting Point Apparatus, Analog, SMP10

Digital selection & display of temperature
High accuracy
Easy to operate with plateau facility
Ideal for educational use
Supplied with calibration certificate

The SMP10 has been designed with safety and ease of operation in mind making it ideal for use in education. The temperature is selected, measured and displayed digitally making it accurate and negating the need for a thermometer.
Two samples can be tested simultaneously. They are viewed via a magnifying lens with clear observation aided by built in illumination. Extendible back feet allow the unit to be operated at the optimum viewing angle. Full access to the block aids cleaning. The simple to follow instructions are printed directly on the instrument in most European languages for ease of use.
To operate simply select a plateau temperature via the three digit display and press "start". The unit quickly heats up and remains at the selected plateau temperature until the user is ready to start the test. Insert the sample tubes and press "start". The unit then heats slowly so that the melt can be observed. When the sample is seen to melt, note the temperature on the display. Press "stop" to end heating and cool the block.
Supplied complete with calibration certificate showing individual serial number for traceability.

Number of samples                         2
Temperature range                         Ambient to 300°C
Temperature accuracy                    ± 1.0°C at 20°C, ± 2.5°C at 300°C
Display                                           Three digit LED
Display resolution                          1°C
Sensor                                           Platinum resistance PT100
Ramp rates                                    20°C per minute to plateau, 2°C per minute to melt
Dimensions (w x d x h)                  160 x 220 x 170mm
Net weight                                    1.8 Kg
Electrical supply                             230V, 50Hz, 75W

Melting point tubes
Made from soda glass, these tubes are easy to seal in a Bunsen flame and break into two. Supplied in robust tube holder, pack of 100 tubes. Tube overall length is 100mm Tube diameter = 1.9mm, inner diameter = 1.3mm and wall thickness = 0.3mm.

SMP10         Melting point apparatus, complete with pack of 100 melting point tubes, closed at one end
SMP10/1       Glass melting point tubes, closed at one end, pack of 100
SMP2/1         Glass melting point tubes, closed at both ends, pack of 100
SMP1/4         Glass melting point tubes, open at both ends, pack of 100

Stuart Erime Noktası Tayin Cihazı, Melting Point, Gelişmiş Dijital, SMP30

Maximum temperature 400°C
Patented head up display
Integrated cooling 350°C to 50°C in 10 minutes
Large easy to read user friendly interface

Designed for fast accurate determination of melting points, the SMP30 can take three samples simultaneously within the optimised heating block, the unit has a maximum temperature of 400°C. To allow maximum flexibility a plateau facility is included with variable ramp rate between 0.5 and 10°C in 0.1°C increments. The tubes are illuminated with bright white LED's to give the clearest view of the samples during the melt. The block has been designed for easy access for cleaning, the front of the head is fully removable to allow full access to the micro furnace.

The SMP30 has a large clear back lit alphanumeric LCD display, running the menu system which clearly guides you through the melting process with comprehensive directions. Language is switchable between English, German, French and Italian. It is possible to record up to 8 events in memory for each of the three sample tubes, as well as being temperature stamped these events are also date and time recorded, thanks to the integrated real time clock.

The SMP30 features the patent pending head up display, this unique feature displays a floating image of the block temperature, visible through the eyepiece, in front of the tubes. The head up display eliminates the need for the user to keep switching their gaze between the tubes and the temperature display, through the eyepiece they can now see both at once.

To allow the most comfortable viewing angle the SMP30 features a two stage head adjustment, in the first movement the head is pulled towards the user, then in a separate motion the angle of the head can be adjusted by up to 126°, and will automatically hold in place due to the torsion resistant design to create the perfect viewing angle. The head can then be stored safely back within the body of the unit for storage.

The design of the unit has lots of other useful features such as slots for storing pre-prepared samples and a storage draw to hold a container of capillary tubes.

An accessory printer is available separately to produce a written record of the melt, and all units are supplied with a calibration certificate showing individual serial numbers for traceability.

No of samples                                    3
Temperature range                            Ambient to 400°C
Temperature resolution                      0.1°C
Temperature accuracy                         ±0.5 at 50°C, ±1.0 at 100°C, ±2.5 at 360°C
Display                                               40 x 4 LCD
Ramp rates                                        0.5-10°C in 0.1°C increments
Temperature sensor                          PT1000 Platinum resistance
Memory                                              8 results per tube
Accessory printer available                Yes
Date/time display                              Yes
Cool down time 350-50°C                ~10 mins
Heat up time 50-350°C                    ~ 6 mins
Electrical supply                               120V/230V, 50Hz
Language variants                            English, German, French, Italian
Temperature units                           °C
Size (h x d x w)                               325 x 200 x 170mm
Net Weight                                     3.6kg

SMP30                 Melting point apparatus, complete with pack of 100 melting point tubes, open at one end.
SMP30/1             Accessory printer with power supply
SMP10/1             Glass melting point tubes, closed at one end, pack of 100

 

Stuart Otomatik Erime Noktası Tayin Cihazı, Automatic Melting Point, SMP40

Maximum temperature 400°C
Utilises latest technology in digital imaging
5.7 Inch colour VGA touch screen display
Unique split design concept
Integrated cooling 350°C to 50°C in 10 minutes
Also available with IQ/OQ documentation

The SMP40 automatic melting point uses the latest technology in digital image processing to accurately identify the melt of up to three samples simultaneously. The unit comes with a 5.7 inch colour VGA display, on which the melt can be watched real time, or the melt video will automatically be saved as an AVI file that can be reviewed later, either on the unit or via PC, providing traceability long after the sample has gone. The result can also be overridden if for any reason you dont agree with the result calculated by the image processing algorithm.

The SMP40 is fully programmable via the touch screen display, once the user has set the plateau temperature up to the maximum temperature of 400°C they can select the ramp rate, between 0.1 and 10°C in 0.1°C increments. During use a library of preset methods can be built up to streamline the method input for repeat measurements. For materials where the user is unaware of an approximate melting point, and therefore unable to set the plateau temperature, the SMP30 can be used in rapid melt mode. During rapid melt mode a fast scan of the full temperature range is undertaken to provide an approximate melt temperature, then a method will be automatically programmed with the appropriate plateau temperature to allow a more accurate measurement to be carried out.

The SMP40 has an innovative split design concept, the unit can be used as normal or the control side and the melt side can be separated, allowing for the maximum in footprint flexibility. After the samples have been loaded the melt side of the unit can be placed at the back of the bench or even in a fume cupboard to catch any potentially dangerous fumes. Once the unit has been split the control panel side can be used in two orientations, either landscape or portrait to allow the perfect viewing angle whether you are sat or stood at the bench, the screen automatically changes orientation with the unit.

The unit can store up to 200 result files with videos, if required data can be easily transferred from the unit to a flash memory drive or PC via one of the USB connectors.

The unit has been designed to include a number of other useful features such as slots to accommodate pre-prepared samples and a draw to house your unused melting point tubes. Also included in the draw is a handy glass cutter, which can be used to accurately cut tubes in half quickly and cleanly for users who prefer to use half tubes.

All units are supplied with a calibration certificate showing individual serial numbers for traceability. The SMP40 conforms to Pharmacopeia and GLP.

No of samples                                         3 simultaneously
Temperature range                                Ambient to 400°C
Temperature resolution                         0.1°C
Display                                                   5.7
Ramp rates                                            0.1-10°C in 0.1°C increments
Temperature sensor                              PT1000 Platinum resistance
Memory                                                 200 results with video
Cool down time 350-50°C                    ~10 mins
Heat up time 50-350°C                        ~ 6 mins
Oven control                                         Closed loop PID
Flash memory/PC interface                   USB
Sample level                                         2-3mm in 50mm or 100mm length capillaries
Electrical supply                                   120V / 230V, 50Hz
Temperature units                               °C, °F, K
Size (h x d x w)                                    175 x 210 x 328mm
Net Weight                                           3.2kg
Languages                                           English, French

SMP40                   Automatic melting point apparatus, complete with pack of 100 melting point tubes, closed at both ends.
SMP40/IQOQ         Automatic melting point apparatus, complete with IQ/OQ documentation and pack of 100 melting point tubes, closed at both ends.
SMP2/1                    Glass melting point tubes, closed at both ends, pack of 100